Pumps are designed for handling highly abrasive slurry with
Capacity: 5-550 m3/hr
Head: 6 to 55 mts.
Discharge Size: 25 mm to 200 mm.
Impeller TypesClosed, Semi-Open and Vertex
ApplicationThe pumps find application in the mineral processing industry for transferring highly abrasive, corrosive slurry like iron ore, gold, zinc, lead, chromite, phosphate ores & ash and many other slurries.
Pumps also find application in:
- Paper and pulp industry
- Effluent treatment plants
- Sand beneficiation plants
- Ore beneficiation plants
- Plywood industry
- Sugar industry
- Glass and Picture Tube industry and many other applications where pump has to handle the solids.
Wear PartsIn nihard, hichrome, natural rubber, neoprene, polyurithine, CD4MCU, SS316, CF8M and other material. Wear parts can be interchangeable with different material combinations.
General Purpose Pump For Tough ApplicationsDesignThe shaft and bearing assembly unit is easily replaceable and is adjustable to maintain optimum clearance between impeller and inlet. The standard pump is outfitted with a packed gland shaft seal but can easily be fitted with a me-chemical or dynamic seal. The pump can also be supplied with a “Floating Seal”, which is virtually doesn’t require any maintenance and requires extremely minimum volume of sealing water.
Wear PartsThe VASA pump is equipped with wear part in soft wear resistant natural rubber or Ni-hard. A range of different materials is also available such as, Cloroprene-EPDM-Butyl – Nitril or Hypalon rubber and also Polyurethane. Stainless Steel and High Chrome iron parts with extreme hardness can be supplied for special applications. This selection, together with the various shafts sealing arrangement, makes it possible to adapt the pump for both abrasive and corrosive applications.
Wear parts in different materials are completely inter changeable i.e. any combination of materials is possible.
CREATIVE PUMPS can also offers closed – semi-open-and vortex flow impellers for all CHP pumps of size 210-80 and above. The three smallest sizes are only available with semi-open impellers.
InstallationThe overhead mounted adjustable motor base plate makes the installation very compact, requires a minimum of floor space and eliminates the need for special foundations.
ApplicationsThe pumps are primarily designed for pumping abrasive slurries and thus their main applications are within the mineral processing industry for transport of solid particles in suspension. The different special material qualities for wear parts also make the pumps suitable for duties with a combination of corrosion and abrasion such as hydrometallurgical and some heavy chemical applications. The pumps also find many applications within the paper and pulp industry where they are used for pumping of clay, time caustic sludge, scrubber water, reject pulp, transport of wood chips, etc. The pumps are also installed in various applications in the sugar industry.